blog

Is Parity Worth It for Your Building? A Surveyor’s Look at the Company’s Results

Written by

Is Parity Worth It for Your Building? A Surveyor’s Look at the Company’s Results

Parity can deliver measurable energy savings for buildings that match its target profile, but it won’t pay off for every property. Buildings with central HVAC plant, variable occupancy, and older controls are where the service earns its fee. Very small sites, or properties already running modern systems, are less likely to see a return. Check your building type first, then ask for a site-specific estimate.

Key Takeaways

  • Parity‘s Optimizer service adjusts HVAC setpoints remotely, without needing on-site engineers daily.
  • Multifamily blocks, co-ops, and hotels with central plant are the strongest candidates for savings.
  • Energy optimisation cuts consumption by matching heating output to actual demand, not a fixed schedule.
  • Small buildings where the service fee exceeds the annual saving are unlikely to benefit.
  • Savings figures from any provider should be labelled as actual, projected, or potential before you act on them.

What does ‘parity’ mean in this context, and what service does Parity actually provide?

Parity, in building energy terms, means the point where your savings equal or exceed the cost of achieving them. Parity (trading as ParityGo) is a company that provides a remote building energy optimisation service called the Optimizer, aimed at multifamily residential buildings and hotels. Energy optimisation means adjusting a building’s heating and cooling controls continuously. The system uses only the energy the building actually needs at any given time, rather than running at a fixed output regardless of conditions.

The Optimizer monitors HVAC setpoints and adjusts them in response to real-time conditions. No engineer needs to be on site for day-to-day adjustments.

Which buildings see real savings, and which are unlikely to benefit?

Buildings with central HVAC plant and variable occupancy see the strongest results. A 120-unit apartment block where the boiler runs at full output on a mild October afternoon is a good candidate. The system is overshooting, and the Optimizer can trim that waste without anyone noticing a comfort change.

Three situations reduce the benefit. Buildings that already run modern controls with demand-based scheduling get less marginal gain. Very small sites where the monthly service fee is close to the projected saving may never reach payback. Properties without central plant aren’t a fit for this type of service at all.

What do Parity’s published case-study outcomes look like, and are those figures guaranteed or projected?

Parity publishes case studies showing energy savings across residential and hotel properties. No verified third-party figures are available for this article. Treat any percentage quoted in a sales conversation as projected or potential until you see actual billing data from a comparable building. A projected saving is a model. An actual saving is a measured outcome from a named site.

Ask ParityGo to show you case studies from buildings that match yours in size, age, and heating system type. Then ask whether those figures are pre- or post-weather correction, since a mild winter can make any system look efficient.

Approach Best building fit Management needed Ongoing cost Savings evidence
Do nothing Any None None None
Simple thermostat upgrade Small sites, individual units Low, one-off setup Low Variable, self-reported
Parity Optimizer service Multifamily blocks, hotels, central plant Remote, Parity-managed Monthly service fee Company case studies, verify with billing data

How to choose the right energy optimisation approach for your building

  • Whether your building type matches the profiles where Parity reports verified savings: multifamily blocks, hotels, and mixed-use buildings with central plant.
  • Whether the projected annual saving in pounds clearly exceeds the annual service cost within a payback period you can accept.
  • Whether the service can be managed remotely by Parity’s team, or requires dedicated on-site engineering staff.
  • Whether savings figures you’ve been shown are actual case-study outcomes or forward-looking estimates, and what the named source is.
  • Whether your existing HVAC controls are compatible with the Optimizer without a full hardware replacement.

ParityGo focuses on multifamily and hotel buildings with central plant. That is the building profile where remote setpoint management produces measurable reductions in energy waste. If your building fits that description and the service fee is comfortably below the projected saving, the case for a detailed review is sound.

Frequently Asked Questions

How much does Parity cost per month for a 100-unit residential building?

ParityGo doesn’t publish a standard rate card for a building of this size. The fee varies by building complexity, plant room configuration, and contract length. Ask for a written quote tied to your specific building’s annual energy spend, then compare the annual fee against the projected saving before agreeing to anything.

How long does it take to install Parity’s system and see the first bill reduction?

Installation involves connecting monitoring hardware to existing HVAC plant. For a standard residential block, that can often be completed in a day or two. Bill reductions tend to appear within the first full billing cycle after the Optimizer is calibrated to the building’s actual occupancy patterns. Ask ParityGo for a timeline specific to your plant room setup.

What happens if Parity’s savings don’t cover the service fee?

No energy optimisation provider can guarantee savings. Consumption depends on weather, occupancy, and tenant behaviour, and all three vary year to year. Ask ParityGo directly whether they offer any performance commitment and what the conditions are. If they don’t, factor that risk into your payback calculation before signing a multi-year contract.

Does Parity work with older HVAC systems or only newer plant rooms?

Older systems with pneumatic or basic electronic controls may need an interface device before the Optimizer can connect. ParityGo should assess your plant room before quoting. A building with a 1980s boiler and no existing building management system is not automatically excluded, but the compatibility check must happen before any savings figure is meaningful.